Mitsubishi Electric QJ71AS92 User Manual page 83

5 UTILITY PACKAGE (GX Configurator-AS)
5 - 15
Downloaded from ManualsNet.com
(2) Command buttons
Current value display
Make text file
Start monitor /
Stop monitor
Execute test
Close
The following monitor/test selection menu is displayed.
Configuration Error
LDS_0 (Detection of Slave Addr. 0)
Automatic Address Assignment Function
Automatic Address Assignment Available
Configuration Mode Active
Normal Operation Active
AS-i Power Fail
Offline Phase Active
Peripheral Faults
Current Error Code
Error Code History 1
Error Code History 2
Error Code History 3
Error Code History 4
Error Code History 5
X/Y monitor/test
(A-slaves) List of Detected Slaves (LDS)
(B-slaves) List of Detected Slaves (LDS)
(A-slaves) List of Active Slaves (LAS)
(B-slaves) List of Active Slaves (LAS)
(A-slaves) List of Projected Slaves (LPS (For Read))
(B-slaves) List of Projected Slaves (LPS (For Read))
(A-slaves) List of slaves that differ from settings
(B-slaves) List of slaves that differ from settings
(A-slaves) Error Slave List
(B-slaves) Error Slave List
(A-slaves) List of Peripheral Faults (LPF)
(B-slaves) List of Peripheral Faults (LPF)
search engine
Displays the current value of the item selected. (This is used
to check the text that cannot be displayed in the current
value field. However, in this utility package, all items can be
displayed in the display fields).
Creates a file containing the screen data in text file format.
Selects whether or not to monitor current values.
Performs a test on the selected item. To select more than one
item, select them while holding down the Ctrl key.
Closes the screen that is currently open and returns to the
previous screen.
Item
MELSEC-Q
Reference section
Section 3.4.2 (4)
Section 3.4.2 (17)
Section 5.5.1
Section 5.5.2
Section 5.5.3
Section 5.5.4
Section 5.5.5
Section 5.5.6
Section 5.5.7
Section 5.5.8
Section 5.5.9
Section 5.5.10
Section 5.5.11
Section 5.5.12
Section 5.5.13
5 - 15