Table of Contents
Advertisement
5 UTILITY PACKAGE (GX Configurator-AS)
5 - 42
Downloaded from
ManualsNet.com
(4)
Switch to the protected operation mode.
Perform operation to return from the configuration mode selected in (1) to the
protected operation mode. Choose "Mode Change Request" in the setting value
field of "Protected Operation Mode Change Request" and execute a selection
test to return to the protected operation mode.
Check the mode change request result in "Mode Change Request Result
(Current Error Code)". If any error is found, take corrective action in accordance
with the error code.
(5)
Storage the configuration data onto the EEPROM.
1)
Choose "Write Request" in the setting value field of "Turn OFF the
EEPROM Write Request" and execute a selection test to make a EEPROM
write request.
2)
Confirm that EEPROM write is complete.
Making a write request changes the indication in the setting value field of
"EEPROM Write Request " as indicated below.
At normal completion: "Not yet written"
At abnormal completion: "Not yet written"
*1 If the write time is short, "Writing" does not appear.
If "Write Failed" has occurred, scroll the screen, check the error codes in
"Current Error Code" and "Error Code History 1-5", and take corrective
action according to the error codes.
3)
Choose "OFF" in the setting value field of "Turn OFF the EEPROM Write
Request" and execute a selection test to turn OFF the EEPROM write
request.
search engine
MELSEC-Q
"Writing"
"Write completed" *
"Writing"
"Write Failed" *
5 - 42
1
1
Advertisement
Table of Contents
