Table of Contents
Advertisement
x-IMU3 User Manual v0.11
April 6, 2022
11.1.38 Wi-Fi client IP address
Description:
Configures the device IP address in Wi-Fi client mode when DHCP is disabled. This
setting will be ignored if DHCP is enabled.
JSON key:
"wiFiClientIPAddress"
JSON value type:
string
Default value:
"192.168.1.2"
11.1.39 Wi-Fi client netmask
Description:
Configures the netmask in Wi-Fi client mode when DHCP is disabled. This setting
will be ignored if DHCP is enabled.
JSON key:
"wiFiClientNetmask"
JSON value type:
string
Default value:
"255.255.255.0"
11.1.40 Wi-Fi client gateway
Description:
Configures the gateway in Wi-Fi client mode when DHCP is disabled. This setting
will be ignored if DHCP is enabled.
JSON key:
"wiFiClientGateway"
JSON value type:
string
Default value:
"192.168.1.1"
11.1.41 Wi-Fi AP SSID
Description:
Configures the SSID of the device in Wi-Fi AP mode. This is the name of the network
created by the device. The SSID may be up to 31 characters long. If the SSID is left
blank then the device will use an SSID made up of the product name and the serial
number in the format "x-IMU3 XXXX-XXXX-XXXX-XXXX".
JSON key:
"wiFiAPSsid"
JSON value type:
string
Default value:
""
11.1.42 Wi-Fi AP key
Description:
Configures the security key in Wi-Fi AP mode. This is the password required to
connect to the network created by the device. The key may be up to 31 characters
long. If the key is left blank then the network will not use security and a password
would not be required to connect to the device.
JSON key:
"wiFiAPKey"
JSON value type:
string
Default value:
""
41
Advertisement
Table of Contents
Need help?
Do you have a question about the x-IMU3 and is the answer not in the manual?