Device Settings; Individual Settings; Calibration Date (Read-Only) - X-IO x-IMU3 User Manual

x-IMU3 User Manual v0.11
April 6, 2022
Key
"sync"
"name"
"serial"
"ip"
"port"
"send"
"receive"
"rssi"
"battery"
"status"
Example*:
"sync":
"name":
"serial":
"ip":
"port":
"send":
"receive":
"rssi":
"battery":
"status":
* The actual JSON will not include any whitespace.

11 Device settings

11.1 Individual settings

11.1.1 Calibration date (read-only)

Description: Calibration date. See Section 4 on page 12 for more information.
JSON key:
"calibrationDate"
JSON value type: string
Default value:
"Unknown"
Value type Description
number Used for synchronisation
string Device name
string Device serial number
string Device IP address
number TCP port
number UDP send port (device sends to this port)
number UDP receive port (device receives on this port)
number RSSI percentage (always 0 in Wi-Fi AP mode)
number Battery percentage
number Charging status (See Table 23 on page 29)
Table 29: Network announcement message key/value pairs
0,
"x-IMU3",
"0123-4567-89AB-CDEF",
"192.168.1.1",
7000,
8000,
9000,
100,
100,
2
33