Table of Contents
Advertisement
x-IMU3 User Manual v0.11
April 6, 2022
11.1.14 High-g accelerometer sensitivity (read-only)
Description:
High-g accelerometer sensitivity vector used for inertial sensor calibration. See
Section 4.3 on page 13 for more information.
JSON key:
"highGAccelerometerSensitivity"
JSON value type:
array of 3 numbers
Default value:
[1.0, 1.0, 1.0]
11.1.15 High-g accelerometer offset (read-only)
Description:
High-g accelerometer offset vector used for inertial sensor calibration.
Section 4.3 on page 13 for more information.
JSON key:
"highGAccelerometerOffset"
JSON value type:
array of 3 numbers
Default value:
[0.0, 0.0, 0.0]
11.1.16 Device name
Description:
User-defined device name up to 31 characters long.
JSON key:
"deviceName"
JSON value type:
string
Default value:
"x-IMU3"
11.1.17 Serial number (read-only)
Description:
Unique 64-bit serial number expressed as a string of 16 hexadecimal digits in the
format "XXXX-XXXX-XXXX-XXXX".
JSON key:
"serialNumber"
JSON value type:
string
Default value:
"Unknown"
11.1.18 Firmware version (read-only)
Description:
Current firmware version. See Section 12 on page 52 for more information about
updating the device firmware.
JSON key:
"firmwareVersion"
JSON value type:
string
Default value:
"Unknown"
11.1.19 Bootloader version (read-only)
Description:
Bootloader version.
JSON key:
"bootloaderVersion"
JSON value type:
string
Default value:
"Unknown"
See
36
Advertisement
Table of Contents
Need help?
Do you have a question about the x-IMU3 and is the answer not in the manual?