External Antennae Enabled; Wi-Fi Region; Wi-Fi Mac Address (Read-Only); Wi-Fi Ip Address (Read-Only) - X-IO x-IMU3 User Manual

x-IMU3 User Manual v0.11
April 6, 2022

11.1.30 External antennae enabled

Description:
Enables (true) or disables (false) the external antennae. An antennae must be
connected to the U.FL connector if the external antennae is enabled. The internal
antennae will be used if the external antennae is disabled.
JSON key:
"externalAntennaeEnabled"
JSON value type: true or false
Default value: false

11.1.31 Wi-Fi region

Description: Configures the region for Wi-Fi operation. The device will operate according to the
regulations of the selected region. See Section 11.1.34 for a list of channels available
in each region. The possible values are listed in Table 31.
JSON key:
"wiFiRegion"
JSON value type: number
Default value:
2

11.1.32 Wi-Fi MAC address (read-only)

Description:
Wi-Fi Media Access Control (MAC) address.
JSON key:
"wiFiMacAddress"
JSON value type: string
Default value: 0

11.1.33 Wi-Fi IP address (read-only)

Description: Current IP address of the device. A value of 0.0.0.0 indicates that the device does
not yet have an IP address.
JSON key:
"wiFiIPAddress"
JSON value type:
string
Default value: 0

11.1.34 Wi-Fi client SSID

Description: Configures the Service Set Identifier (SSID) in Wi-Fi client mode. This is the name of
the router that the device will connect to. The SSID may be up to 31 characters long.
JSON key:
"wiFiClientSsid"
JSON value type: string
Default value: "x-IMU3 Network"
Value Region
1 United States (US)
2 Europe (EU)
3 Japan (JP)
Table 31: Wi-Fi regions
39