LEGRAND Raritan PXO Quick Setup Manual
Hide thumbs Also See for Raritan PXO:

Advertisement

Quick Links

Raritan PXC/PXO
Thank you for purchasing the PXC/PXO intelligent power distribution unit (PDU).
This guide describes two types of PDU models that can distribute power to IT devices: PXC and PXO. For their differences, see
Comparison between PXO and PXC
This Quick Setup Guide explains how to install and configure the PXC/PXO. For further details on using the PXC/PXO, access online
help from the application, or download the user guide from Raritan's
detailed information on this release, see the latest release notes on the Support page.
Safety Precautions
WARNING! Read and understand all sections in this guide
before installing or operating this product. Failure to heed any
of the following WARNINGS may result in electric shock, fire,
personal injury and death. Prior to operating this product, the
user should read the online help and specifically the warnings
in the online help.
WARNING! Connect this product to an AC power source
whose voltage is within the range specified on the product's
nameplate.
WARNING! Connect this product to an AC power source that
is current limited by a suitably rated fuse or circuit breaker in
accordance with national and local electrical codes.
WARNING! Use this product in a dry location.
WARNING! Connect this product to a protective earth ground.
Never use a "ground lift adaptor" between the product's plug
and the wall receptacle.
WARNING! If this product is a model that requires assembly
of its line cord or plug, all such assembly must be performed
by a licensed electrician and the line cord or plugs used must
be suitably rated based on the product's nameplate ratings
and national and local electrical codes.
QS Rule
PXC_PXO Quick Setup Guide
PXC_PXO_QSG_0B_3.5.10_E  255-80-0059-00 RoHS
(on page 1).
QUICK SETUP GUIDE
Support page
http://www.raritan.com/support/
(
Comparison between PXO and PXC
PXO and PXC are functionally similar and have the same
connection ports on their front panels. However, their
purposes and mechanical designs vary.
PXC is designed for an information technology equipment
room like data centers or server rooms.
PXO is designed for regular offices.
PXO is usually smaller than PXC and has much less
outlets.
PXC has more rackmount methods than PXO.
For additional information, refer to the user guide or online
help.
QS Rule
Unpacking the PXC/PXO
The following describes the equipment shipped with PXC or
PXO PDU in addition to this Quick Setup Guide. If any pieces
are missing or damaged, report this to Raritan Technical
Support, or contact the Raritan partner where you purchased
the product.
PXC
One PXC
Buttons (Zero U), or bracket pack and screws (1U/2U)
). For more
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Raritan PXO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LEGRAND Raritan PXO

  • Page 1 QUICK SETUP GUIDE Raritan PXC/PXO Thank you for purchasing the PXC/PXO intelligent power distribution unit (PDU). This guide describes two types of PDU models that can distribute power to IT devices: PXC and PXO. For their differences, see Comparison between PXO and PXC (on page 1).
  • Page 2: Before You Begin

    2. Align and slide the Raritan-provided mounting button to the rear rail of the PDU.  One PXO  Brackets and screws QS Rule Before You Begin 1. Prepare the installation site. Make sure the installation area is clean and not exposed to extreme temperatures or humidity.
  • Page 3: Connecting The Pdu To A Power Source

    PXO Rackmount Method You can place PXO in any appropriate location with or without fastening it. To fasten it, simply screw up fasteners to screw holes on two sides of PXO. 4. Press the PDU forward, pushing the mounting buttons through the mounting holes, then letting the PDU drop slightly.
  • Page 4: Initial Network Configuration

    2. Connect the other end of the cable to your LAN. 2. Press to select "Device Info," and press Note: If connecting both ports to the LAN, you must connect them to two "different" subnets. If you are not sure whether the device is connected to the same or different subnets, 3.
  • Page 5: Appendix A: Configuration Via A Mobile Device Or Pdview

    5. PXC/PXO is sent from the factory with all the outlets ON. If 2. Connect the mobile device to the appropriate USB port on your model is outlet-switching capable, turn OFF the the PXC/PXO. outlets without devices connected.  : USB-A port. 6.
  • Page 6: Appendix C: More Information

     To remove an IT device from a locking outlet: Wi-Fi LAN adapters Supported 802.11 1. Press and hold down the tiny button adjacent to the protocols PXC/PXO outlet. Edimax EW-7722UnD A/B/G/N TP-Link TL-WDN3200 v1 A/B/G/N Raritan USB WIFI A/B/G/N Connecting the Wireless LAN Adapter You can connect the wireless LAN adapter either to PXC/PXO or to a USB hub attached to PXC/PXO.

This manual is also suitable for:

Raritan pxc

Table of Contents