Troubleshooting - infaco P9T120B Manual

Troubleshooting

Disruptions
The shears will not start up
The grip will not start up
20
Causes
Battery flat
Bad connection between the
battery connectors and the pole
connectors
Bad connection between the
shears and the pole power supply
socket
Shear cable damaged or out of
order
Battery flat
Solutions
Charge the battery
Check that the contacts and the
battery compartment are clean.
Check that the contact is clean
and the shears properly inserted in
their support
Check the cable operation directly
on the shears. If the shears oper-
ate, contact your INFACO dealer
Replace the battery (See SERVIC-
ING AND MAINTENANCE section
on page 15). If the grip will still not
start, contact your INFACO dealer