User guide
Pole HMI description
The pole command grip is started by a fi rst press on the trigger
trigger and not the shear trigger)
The LED lights for a few seconds and indicates the battery capacity as per the following
table:
Visual indication
The grip turns off automatically:
•
if the shears are disconnected from the pole.
•
if the shears are powered off using the shear on/off button.
•
after 10 minutes without use.
•
if the battery is disconnected.
12
Green steady
Red fl ashing
Red steady
battery level
from 100% to 10%
from 10% to 0%
CR123A battery to be replaced, the pole
is no longer operational.
(IMPORTANT, the pole