Table of Contents
Advertisement
Troubleshooting
Disruptions
Signifi cant abnormal
vibrations
Broken carbon rod
Noise in the extension
The machine will not
start
Unexpected machine
stoppages
Causes
Incorrect comb assembly
Incorrect comb tightening
Incorrect rod tightening
Comb wear
Defective tool detection
Wear
Extension guide damaged
Battery discharged
red steady
No power supply
Other
Too strong a pulse
Mechanical jam
red fl ashing
Battery discharged
red steady
Solutions
Refi t the comb by following the
procedure and contact the dealer if
necessary.
Re-tighten the comb by following
the procedure.
Re-tighten the rods by following
the procedure.
Check that one of the combs is not
loose or damaged, and contact the
dealer if necessary.
Contact your dealer.
Replace the broken and/or worn
rod.
Contact your dealer.
Recharge the battery.
Re-connect the machine.
Contact your dealer.
Change the work method or ask
your dealer for advice. Restart by
pressing the trigger once.
Recharge the battery.
Advertisement
Table of Contents
