Table of Contents
Advertisement
Troubleshooting
Disruptions
Significant abnormal
vibrations
Broken carbon rod
Noise in the extension
The machine will not
start
Unexpected machine
stoppages
Causes
Incorrect comb assembly
Incorrect comb tightening
Incorrect rod tightening
Rod wear
Defective tool detection
Wear
Extension guide damaged
Battery discharged
No power supply
Other
Too strong a pulse
Mechanical jam
Battery discharged
Solutions
Refit the comb by following the
procedure and contact the dealer if
necessary.
Re-tighten the comb by following the
procedure.
Re-tighten the rods by following the
procedure.
Check that one of the rod is not loose
or damaged.
Contact the dealer if necessary.
Contact your dealer.
Replace the broken and/or worn rod.
Contact your dealer.
Recharge the battery.
Re-connect the machine.
Contact your dealer.
Change the work method or ask your
dealer for advice. Restart by pressing
the trigger once.
Recharge the battery.
17
Advertisement
Table of Contents
