Table of Contents
Advertisement
SHOCK ABSORBER, LINK FORK 9
Info
Watch the pressure regulator dial.
Ensure that the damper is filled to the specified pres
sure.
-
Screw the filling port shut with tap handle f).
-
Close spigot G) and take the damper out of the special tool.
-
Tighten the filling port screw.
Guideline
Screw, filling port,
reservoir
-
Ensure that adjusting ring
ring.
8 .
-
Mount washer
-
Measure the total spring length while the spring is not under
tension.
-
Position the spring.
Guideline
Spring rate
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
Weight of rider: 85 ...
95 kg (187 ... 209 lb.)
8 .
-
Mount washer
-
Mount spring retainer
C,.
-
0.
Mount lock ring
Alternative 1
-
Tension the spring by turning the adjusting ring to the
prescribed value.
Guideline
I Spring preload
I Hook wrench (90129051000)
3 Nm (2.2 lbf ft)
M5
O
is mounted with the clamping
45 N/mm (257 lb/in)
48 N/mm (27 4 lb/in)
51 N/mm (291 lb/in)
13 mm (0.51 in)
1
(0
p. 307)
...
81
Advertisement
Table of Contents
