Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
30
-
Lubricate seals on seal ring retainer
I Lubricant (T14034)
(0
p. 292)
-
Push the seal ring retainer onto the piston rod.
✓ The thread faces upward.
-
Degrease and clamp the top of the piston rod.
I Clamping stand (T14016S)
-
Mount spring (D.
Info
Mount the spring retainer at the bottom.
8
-
Mount adjusting valve
new O-ring.
✓ The tip faces upward.
-
Lubricate O-ring of adjustment valve.
I Lubricant (T158)
(0
p. 292)
-
Mount and tighten piston retainer
unit (!).
Guideline
Piston retainer
M9x1
on piston rod
-
Clamp the shock absorber cartridge at the bottom.
I Clamping stand (T14072)
-
Lubricate friction ring @ on the shock absorber cartridge.
I Fork oil (SAE 4) (48601166S1)
-
Push the piston rod into the shock absorber cartridge.
fD
-
Lubricate O-ring
of the seal ring retainer.
I Lubricant (T158)
(0
p. 292)
-
Mount and tighten the seal ring retainer.
Guideline
Seal ring
M35.5x0.8
retainer on
cartridge
@.
(0
p. 310)
in the piston rod with spring and
0
with shock absorber
20 Nm (14.8 lbf ft)
®
Loctite
2701
(0
p. 311)
(0
p. 291)
40 Nm (29.5 lbf ft)
®
Loctite
2701
TM
TM
Advertisement
Table of Contents
