Husqvarna FS 450 2017 Repair Manual page 39

e
I
-0
T02862-10
-
Warm up the outside fork tube in area
slide bearings.
Guideline
1
so c
(122 °F)
0
-
Hold the lower slide bearing with the longer side of the
special tool.
I Mounting tool (T14040S)
-
Slide on the outside fork tube.
-
Press the slide bearing all the way into the outside fork
tube.
-
Position the support ring.
-
Hold the seal ring with the shorter side of the special tool.
I Mounting tool (T14040S) (!alp. 311)
-
Press the seal ring and support ring all the way into the
outside fork tube.
8.
-
Mount lock ring
✓ The lock ring engages audibly.
O.
-
Mount dust boot
-
Assemble the individual components that belong
together.
Info
Shock absorber cartridge (right fork leg): cartridge
with silver adapter (9, axle clamp without brake
mount, and outside fork tube without warning
label, rebound adjuster
FORK, TRIPLE CLAMP 6
f)
of the lower
(ll!:!l p. 311)
@).
37