Table of Contents
Advertisement
-
Remove screws
ring.
-
Pull oil filter (3 out of the oil filter housing.
I
Lock ring plier (51012011000)
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing surface.
-
Lay the motorcycle on its side and fill the oil filter housing to
about ½ full with engine oil.
-
Insert the oil filter into the oil filter housing.
-
Lubricate the O-ring of the oil filter cover and mount it with
the oil filter cover
Mount and tighten the screws.
Guideline
I
Screw, oil filter cover
-
Stand the motorcycle upright.
-
Remove filler plug
O-ring, and fill up with engine oil.
Engine oil
•
Info
I
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
401955-12
-
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
-
Start the engine and check for tightness.
LUBRICATION SYSTEM
0.
Remove the oil filter cover with the O
(a
p. 297)
@.
I
M6
110 Nm (7.4 lbf ft)
(D
from the clutch cover together with the
1.20 I
Engine oil
(1.27 qt.)
(SAE 1 0W/50)
(a
p. 290)
Exhaust gases are toxic and
20
255
Advertisement
Table of Contents
