Installing The Shock Absorber - Husqvarna FS 450 2017 Repair Manual

9 SHOCK ABSORBER, LINK FORK
9.10
60

Installing the shock absorber

-
Remove the connecting link of the chain.
-
Take off the chain.
Info
Cover the components to protect them against dam­
age.
@)
-
Remove nut and pull out the fork pivot.
-
Push the link fork back and secure it against falling over.
-
Hold the shock absorber and remove screw
-
Remove the shock absorber carefully at the bottom.
Main work
-
Carefully position the shock absorber into the vehicle from
the bottom.
-
Mount and tighten screw
Guideline
Screw, top M10
shock absorber
@).
O.
60 Nm (44.3 lbf ft)
®
Loctite 2701
...
TM