Mgx 8230 Management; Figure 1-8 Cell Bus Distribution; Table 1-1 Cell Bus Distribution - Cisco MGX 8230 Installation And Configuration Manual

Chapter 1 Introducing the MGX 8230
Figure 1-8
Table 1-1
Physical Slot #
Slot ID Address
CB0_A/B
CB1_A/B
CB2_A/B
CB3_A/B
CB4_A/B
CB5_A/B
CB6_A/B
CB7_A
CB7_B

MGX 8230 Management

Firmware on each card determines the functions and operations of the module. This firmware can be
upgraded by downloading new firmware with a TFTP application running on a workstation or a PC.
The current status and configuration parameters of the modules reside in a Management Information
Base (MIB). The MIB is updated by the firmware in the modules whenever changes to the module status
or configuration occur. The MIB can be interrogated using SNMP commands.
The MGX 8230 supports the following user interface applications:
•
•
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Cell Bus Distribution
Left side of chassis
7
6
5
4
3
2
PXM
1
PXM
Cell Bus Distribution
Left Side Chassis
1 2
1s 2s
x
x
Cisco WAN Manager (formerly StrataView Plus): a Graphical User Interface (GUI) application for
connection management. This application enables operations, administration, and maintenance of
WAN-multiservice networks.
CiscoView: a GUI application for hardware configuration.
Right side of chassis
14
13
12
11
10
9
8
3 4 5 6 7
9 A B C D
x
x
x
x
Cisco MGX 8230 Edge Concentrator Installation and Configuration
MGX 8230 System Overview
Right Side Chassis
10 11 12 13 14
9 A B C D
x
x
x
x
x
1-11