Cisco MGX 8230 Installation And Configuration Manual page 21

Preface
This preface describes the objectives, audience, organization, and conventions of the
Cisco MGX 8230 Edge Concentrator Installation and Configuration Guide.
Audience
This publication is intended for the person who will do the physical installation of the MGX 8230. The
MGX 8230 is typically co-located and rack-mounted with either an IGX 8400 or BPX series switch. The
MGX 8230 installer should be familiar with electronic circuitry and wiring practices and have
experience as an electronic or electromechanical technician, as well as with the Cisco IGX/BPX
switches.
Note This Cisco MGX 8230 Edge Concentrator Installation and Configuration covers the installation and
configuration for the equipment. The command reference and error codes for the MGX 8230 are
described in the section
Installation of the equipment should be performed by trained service personnel.
Warning
Organization
This document is organized into the following chapters:
•
•
•
•
•
•
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
"Related
Chapter 1, "Introducing the MGX 8230"
Chapter 2, "Module and Service Descriptions"
Chapter 3, "Site Preparation"
Chapter 4, "Enclosure Installation"
Chapter 5, "Configuring the MGX 8230 Shelf"
Chapter 6, "Card and Service Configuration"
Documentation."
Cisco MGX 8230 Edge Concentrator Installation and Configuration
xxi