Table of Contents
Advertisement
FRSM-8E1 Specification
Table A-26 List of Counters (continued)
Category
Statistics
Diagnostics
FRSM-8E1 Specification
This section provides information on the E1 operation of the FRSM-8T1E1 card set. Topics are:
•
•
•
•
Table A-27 General Card Specifications
Category
Line Interface connector
Line Rate
Synchronization
Input Jitter Tolerance
Output Jitter Generation
Physical Layer Alarms
Indicators per card
Indicators per line
Maintenance/Serviceability
Features
Reliability, MTBF
Card Size
Power
Cisco MGX 8230 Edge Concentrator Installation and Configuration
A-20
General physical information about the card set
Information about the Frame Relay service
System-level interface
(Table
Statistics and counters
(Table
Description
If any of the counters in the preceding category of Service Counters
includes an "(s)," you can configure it for statistics usage
Last unknown LCN received
Number of cells with unknown LCN
(Table
(Table
A-28)
A-29)
A-30)
Description
RJ-48 when used with RJ-48-8E1 line module.
SMB when used with SMB-8E1 line module
2.048 Mbps
100 bps
Transmitter may be either loop-timed to receiver or synchronized to
shelf (normal mode)
Per ITU-T G.823
Per ITU-T G.823
LOS, OOF, AIS, RAI
Active (Green), Standby (Yellow), Fail (Red)
Active & Okay (Green)
Active & Local Alarm (Red)
Active & Remote Alarm (Yellow)
Internal Problem Isolation Loopbacks
Hot-pluggable cards
> 65000 hours
Front card: 7.25 inches by 15.83 inches (18.42 cm by
42.75 cm)
Back cards: 7.25 inches by 4.125 inches (18.42 cm by
10.48 cm)
–48 VDC, 30W with 8 active E1 lines
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Appendix A
Technical Specifications
A-27)
Advertisement
Table of Contents
