Figure 4-5 Front View Of Mgx 8230 With 23-Inch Mid-Mounting Brackets - Cisco MGX 8230 Installation And Configuration Manual

Chapter 4 Enclosure Installation
If applicable, attach one mid-mounting bracket to each side of the MGX 8230.
Step 1
Have two people position the MGX 8230 into the rack.
Step 2
Use the 10-32 truss head screws to secure the MGX 8230 to the front mounting rails (or mid-mounting
Step 3
rails if appropriate).
Use the10-32 screws to secure the MGX 8230 to the rear mounting rails and to the rear mounting bracket,
Step 4
if applicable.
23-inch rack mounting
Follow these steps to mount an MGX 8230 in a 23-inch rack:
Attach the 23-inch mounting brackets to both sides of the MGX 8230 chassis, as shown in
Step 1
Have two people position the MGX 8230 into the rack.
Step 2
Step 3 Using hardware that you supply, and is appropriate for your 23-inch rack, secure the MGX 8230 to the
rack mounting rails.
Figure 4-5
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001
Front View of MGX 8230 with 23-Inch Mid-Mounting Brackets
Cisco MGX 8230 Edge Concentrator Installation and Configuration
Rack Mounting an MGX 8230
Figure 4-5.
4-9