Subslot/Bay Numbering; Specification - Cisco 1100 Series Hardware Installation Manual

Overview of Cisco 1000 Series Integrated Services Routers
Table 2: Slot, Bay, and Port Numbering
3- Tuple Example
0/1/2
0/0/1

Subslot/Bay Numbering

All interfaces are integrated interfaces. There is only one Bay, and the interface 'Type' is defined by a slot
number. In this example there is only one slot, 0, and each interface is a bay:
Bay 0 Ethernet WAN
Bay 1 Ethernet LAN (Switch)
Bay 2 LTE
Bay 3 DSL
Bay 4 WiFi
Chassis type: C1117-4PLTEEAWE
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 C1117-4PLTEEAWE ok 00:05:58
0/0 C1117-1x1GE ok 00:03:03
0/1 C1117-ES-4 ok 00:03:01
0/2 C1117-LTE ok 00:02:52
0/3 C1117-VADSL-A ok 00:01:56
0/4 ISR-AP1100AC-E ok 00:03:13

Specification

The following table provide Cisco 1100 ISR specification:
Table 3: Cisco 1100 Series ISR Specification
Description
Physical Properties
Dimensions (H x W x D)
Weight with AC PS (w/o modules)
AC Input Power
Slot Bay
0 2nd
0 1st
Specification
Non-LTE models:
H x W X D = 1.75 x 12.7 x 9.03 in. (42 x 323 x
230mm) (includes rubber feet)
LTE models:
H x W X D = 1.75 x 12.7 x 9.6 in. (44 x 323 x 244
mm) (includes rubber feet)
5.5 Lbs. (2.5 kg) maximum
Hardware Installation Guide for the Cisco 1100 Series Integrated Services Router
Specification
Port
3rd
2nd
11