Operating And Test - Quell Q2300 User Manual

Operation And Test
The smoke alarm is operating once AC power is applied, new battery is
installed and testing is complete. When the smoke alarm senses smoke,
the horn will sound a loud (85db) pulsating alarm( 3 beeps repeating).
Red and Green LED indicators:
This smoke alarm features red and green LED indicators that can be
seen through the Push-to-Test button or the LED lens above the test
button.
The LEDs indicate the following:
GREEN
ON – AC power is present.
OFF – AC power is not present.
RED
Red LED Flashes once every 5 minutes and 20 seconds
– Mains power is present indicating normal operation.
Red LED Flashes once a second
– Smoke alarm senses smoke and simultaneously sounds an
audible alarm
Red LED Flashes once every 10 seconds
– Smoke alarm is in hush mode.
Red LED is 3 rapid flashes at 40 second interval
– Indicates which alarm previously detected an alarm condition.
Red LED OFF and unit is sounding alarm
– Another interconnected smoke alarm has sensed smoke and is
signaling this alarm.
12