Mounting Instructions - Quell Q2300 User Manual

Mounting Instructions

Battery Activation
See Battery replacement (page 16) for battery installation.
• To activate the battery, pull out the battery pull tab.
NOTE : If the battery compartment is empty, the alarm cannot mount
on the mounting base.
• Connect the alarm to the base tail first, and then swing the alarm
closed onto the base until a "click" is heard. (See Figure 5)
A.Mounting on the ceiling
Mounting
Slide onto tail
Base
until it 'clicks'.
B.Mounting on the wall
Slide onto tail
until it 'clicks'.
NOTE: Please ensure that battery is installed prior to mounting of
smoke alarm.
Figure 5
11