V1.0
Problem(s)
Grinder wobbles
when running
PARTS BREAKDOWN
Visit www.princessauto.com for more information
Heavy Duty Angle Grinder Stand
Possible Cause(s)
1.
Screws holding grinder
head not tight.
2. Spacers not used with
M10 screws.
3.
Base not secured to
workbench.
Suggested Solution(s)
1.
Tighten the screws
holding the grinder head.
2. Reinstall screws using the
spacers.
3.
Bolt base to workbench.
9004409
9