Data Log; Downloading Data; Clearing The Data Log (After Downloading); How To Upload Data To A Computer - Thermo Scientific TSG Series Installation And Operation Manual

Data Log

Data log is a feature of the local temperature monitoring
accessory.

Downloading Data

1. Insert a USB memory device (not included) and confirm
that the USB icon appears in the Icon Bar of the display
indicating that the drive is functioning.
2. Press the Select/Control button to display the Main
Menu.
3. Press the Select/Control button to confirm/select Data
Log.
4. Press the Select/Control button to select Download.
5. Press the Select/Control button to confirm Download
and USB Status.
6. When the Download is complete (this will only take a few
seconds), the display will show Download Complete.
The display will continue to the Clear Log screen.
Clearing the Data log (After
Downloading)
Clearing the log erases the memory and once
erased, the data cannot be recovered.
1. Once the Data Download has completed the Clear
Log screen will appear.
2. Press the Select/Control button to select Clear Log.
3. Once Clear Log is selected you will see the Clear Log
Are You Sure? screen.
4. Press the Select/Control button to select Yes or use
the Scroll button to Cancel and press the Select/
Control button to confirm.
5. Once the data has cleared you will see the Data Log
Cleared screen and then revert to the default screen.
1.8 cu.ft. Countertop Refrigerator
How to Upload Data to a
Computer
TSG205 allows you to upload your temperature logs to any
USB flash drive for display and analysis on your spreadsheet
software such as Microsoft Excel™. When you're ready to
review the data extracted on a USB flash drive (refer to the
section Downloading Data on how to download above
data), simply insert the USB flash drive into your computer
and open the file in Microsoft Excel or any program that can
read a .CSV file.
Adjusting the Data Log
Interval
1. Press the Select/Control button to display the Main
Menu.
2. Use the Scroll buttons to move to the Settings option,
Press the Select/Control button to confirm/select
Settings.
3. Scroll to the Data Log option, Press the Select/Control
button to confirm/select Data Log.
4. Scroll to select the Set Data Interval and press the
Select/Control button to confirm. The Data Interval is
the important setting for how often data is recording to
local memory.
5. Interval Set will display to confirm your selected Set
Data Interval (the unit is preprogrammed to record
temperature readings every 15 minutes).
Data Log | 15