Cleaning; Placement; Rear Panel; Recommended Fluids - Qtx QTFX-2000LED User Manual

Cleaning:

• Use a soft dry or slightly damp to clean the casing.
• Do not use strong solvents for cleaning the unit.
• Clean the fog mechanism periodically by operating with distilled water instead of fog fluid.
• It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.

Placement:

The QTFX-2000LED has a built-in fluid container and should be operated in an upright position. Ensure that the unit is
positioned on a stable, non-slip surface. Allow adequate space for access to the controls and to avoid straining cables and
connections. Position the unit with the outlet nozzle aimed towards the area where the effect is required but away from
contact with people. When moving or carrying the QTFX-2000LED, always use the top-mounted handles.

Rear Panel:

Rear panel controls:
Press the "Function" button to scroll through the available function screens of the unit.
⚫
Press the "Timer" button to set the required time span for the fog output.
⚫
Press the "Up" and "Down" buttons to increase and decrease the current selected value.
⚫
Press the "Volume" button to start and stop the fog effect. The display will read "Working" when the fog effect is
⚫
in action.
Press and hold the "Manual" button to produce fog on demand. Note: the maximum time for this setting is 15
⚫
seconds, after this the machine will stop releasing fog effect.

Recommended Fluids:

For the QTFX-2000LED fog machine, we strongly recommend the following fluid which has been specifically formulated to
perform best with any heater-based fog machines.
QTX ref code
160.583UK
160.589UK
www.avsl.com
Description
High quality fog fluid pink
Premium fog fluid clear
Size
5 Litre
5 Litre
160.478UK User Manual