Front Door Filter (Rm476) - Black Box ServShield RM470A-R2 Manual

Table of Contents

SERVSHIELD

3.4 Front Door Filter

You can easily remove the filter on the front door to clean or replace it. The part number for the front door

filter is RM476. To remove the filter, remove the two wing nuts on the top of the filter, swing the filter bracket

down and remove the filter.

The life of the filter depends on the environment the ServShield is installed in. You can vacuum the filters or

wash them in warm water with mild detergent. We recommend vacuuming the filter to keep it in peak

condition. If you choose to wash the filter, do so only once and replace it with a new filter when it gets dirty

again.

Figure 3-2. Replacing the Front Door Filter.

Bottom

Front Door

Filter

Filter Bracket

Wing Nut

Table of Contents