Tool-less vented telescoping shelf, adjusts to virtually any cabinet depth-without tools, supports up to 150 pound, use on standard 19-inch rails with square m6 holes (2 pages)
Page 2
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
SERVSHIELD TRADEMARKS USED IN THIS MANUAL Plexiglas ® is a registered trademark of Rohm & Haas Company. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. CONTENTS 1. Specifications ..............2 2.
SERVSHIELD 2. Introduction 2.1 Description The ServShield protects your computer hardware in manufacturing environments and other industrial areas subject to harsh conditions. The cabinet is constructed of 16-gauge steel and it holds 600 lb. (272 kg)of equipment. The cabinet is preassembled, so it’s easy to set up and use.
SERVSHIELD 3. Installation 3.1 Leveling the Cabinet The ServShield cabinets are shipped with both casters and leveling glides for your convenience. Two casters have brakes that you can activate by turning the brake level located on the side of the wheel. You can lower the leveling legs by turning the leveling glide to the proper height using a ⁄...
SERVSHIELD 3.5 Fan Assembly The fan assembly is already installed in the rear door. The part number for the rear fan filter is RM475. If you need to replace a filter, follow these steps: 1. Replace one filter at a time. The twelve screws, which hold the filters in place, are the only thing holding the fan assembly on.
SERVSHIELD Bottom Front Door Filter Filter Bracket Wing Nut Figure 3-3. Replacing the Door Filter. 3.7 Mounting Rails Two pairs of vertical mounting rails (zinc-plated, 12-gauge steel) are in the top and bottom of the ServShield enclosure. The upper rails have 14U (24.5") of rack mounting space and the bottom rails have 17U (29.75") of rack mounting space.