Portable Devices; Ports Available On J5 - Texas Instruments SimpleLink CC3100 User Manual

Connecting to the PC Using EMUBOOST
The first COM port in the list is used for the Flash programming.
Port
Number Port Type Usage
1 VCP
2 VCP
3.1.3 Driver Requirements
The FTDI Debug board requires you to install the associated drivers on a PC. This package is available as
part of the SDK release and is located at:
[Install-Path]\cc3100-sdk\tools\cc31xx_board_drivers\.
The install path is usually C:\ti\cc3100SDK.
16
CC3100 SimpleLink™ Wi-Fi
Figure 13. Portable Devices
Table 7. Ports Available on J5
RT3
MAC logger
® and IoT Solution BoosterPack Hardware
Copyright © 2014–2015, Texas Instruments Incorporated
Comments
Used for TI internal debug only.
Used for TI internal debug only.
SWRU371B – June 2014 – Revised January 2015
www.ti.com
Submit Documentation Feedback