Cuckoo CRP-HW10 Fuzzy Series Manual page 47

TO KEEP COOKED RICE WARM AND TASTY
Controlling Method of Warming Temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even though it is cleaned
frequently and boiled up. Temperature needs to be set.
The reference temperature programmed when the product is shipped may differ from the Instruction.
※
Device Temperature Control
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low. In this case, increase the "Keep
Warm" temperature by 3-4℃.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high. In this case decrease the "Keep Warm"
temperature by 3-4℃.
How to Operate My Mode Function
Use it while opening the lid when there is too much water or rice becomes too soft.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
Press the Auto Clean button for 3 seconds in the waiting
❶
mode to enter the voice setting mode. Press the Auto
Clean button 2 times to enter the warming temperature
setting mode. The display will show as seen in the image.
Press Menu/Selection button so that the display shifts.
❷
After setting the desired temperature, press Pressure
❸
Cook/Glutin Turbo or Keep Warm/Reheat button to
automatically input the selected temperature and enter the
waiting mode. (If you press Cancel or do not operate for 7
seconds, setting will be canceled and you will go back to
the waiting mode.)
(When you press the Auto clean button, you will enter the
customized Keep Warm setting mode without saving the
changed value.)
Press the Auto Clean button for 3 seconds in the waiting
❶
mode to go to voice setting mode. Press the Auto Clean 3
times to enter the customized Keep Warm setting mode.
❷ Press the Menu/Selection button so that the display shifts.
❸ Set the desired value and press Pressure Cook/Glutin Turbo
or Keep Warm/Reheat button to automatically input the set
value and enter the waiting mode. (When you press the Auto
Clean button, you will enter the customized taste setting
mode without saving the changed value).
Press "Menu/Selection" button to raise the setting mode. (1 or 2)
Press "Menu/Selection" button to reduce the setting mode. (-2 or -1)
current keep warm temperature will show.
47