Download Print this page

Denso BHT-1700BWB-1 Operator's Manual page 19

Barcode handy terminal

Advertisement

When 802.11a/b/g/n, GSM/GPRS/EDGE/WCDMA/UMTS/HSDPA/HSUPA/HSPA+/LTE, Bluetooth v4.1
& v2.1+EDR and GPS are all enabled on battery power, the main battery level will drop down
substantially. Prolonged use of the display and continued scanning of barcodes will also affect battery
level.
In order to prevent system from shutting down after the battery is drained out, we suggest that you keep
a fresh battery for replacement at all times, or connect the handy terminal to an external power.
Remove the battery from the BHT or the Cradle then store in a cool and dry place if not using
the BHT for an extended period of time.
Storing a fully charged or depleted (unable to turn on the BHT) battery for long periods time
may deteriorate the performance and life of the battery.
During long-term storage, storing the battery at the 50% of the power level is recommended.
During long-tern storage, charge the battery cartridge fully once a year in order to maintain the
battery performance. When fully charge, allow the battery to discharge down to the
recommended level before restoring.
The battery may swell over the years depending on usage environment. This is a
characteristic of a lithium-ion battery and is not safety hazard.
3.2.4
ダイレクトケーブルを使用 USING THE DIRECT CABLE
(1)
ダイレクトケーブルをハンディターミナルの下端部に取り付けます。
(2)
ケーブルのもう一端をUSB電源アダプタに接続します。
(3)
USB電源アダプタのプラグをコンセントに差し込みます。
(1)
Attach the Direct Cable to the lower end of the handy terminal.
(2)
Connect the other end of the cable to the USB power adapter.
(3)
Plug the USB power adapter into an electrical outlet.
BHTの充電状態はBHT上の画面上方のLEDに表示されます。
The Charge status of the BHT is indicated on the LED above the display screen.
LED on the BHT
充電
charging
ステータス
status
赤点灯
red, solid
赤点滅
red, blink
緑点灯
green, solid
非点灯
not light
説明
description
充電中
charging the BHT
充電エラー
charging error
充電完了
charging complete
充電エラー (充電が停止する)
charging error (charging will stop)
19

Advertisement

loading