Advertisement
During use, charging, or storage of the battery, if any odor comes from the battery, it is overheated,
discolored, deformed, or anything unusual is noticed, remove the battery if in the BHT or charger. Do
not use the battery.
Only use the Cradle for charging the battery.
The battery may be warm immediately after charging or use.
Handling the BHT
Incorrect handling of the BHT could cause electric shock, impaired vision, skin problems, injury, burns
and generation of heat and smoke from the BHT. Be sure to observe the following to use the device
correctly.
Never put the BHT into a microwave oven or high-pressure container.
Doing so could cause the BHT to break, generate heat, rupture or burn.
Never put the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
Avoid using the BHT in extremely humid or dusty areas, or places where a sharp temperature
change is expected.
Moisture or dust will get into the BHT, resulting in malfunction, fire or electrical shock.
If smoke, abnormal odors or noises come from the BHT, immediately turn off the power, remove
batteries from the BHT, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
Do not use the BHT if the case is damaged.
Do not use batteries or power sources other than the specified ones.
Doing so could generate heat or cause malfunction.
Before inserting batteries into the BHT, set the battery selector switch located in the BHT battery
main body to select the desired battery type chosen.
Never disassemble or modify the BHT; doing so could result in an accident such as break or fire.
Do not insert foreign objects in the BHT. Failure to do so could cause smoke or fire.
Do not wet the BHT with any liquid. Failure to do so could cause smoke or fire.
If the liquid leaks out from the broken LCD, do not swallow, inhale or touch it.
Never stare into the reading window.
Handling the scanner using a laser light
Some of the scanners use a laser light for indication of the scanner range. Though the intensity of
the laser light is too low to inflict bodily injury, you must observe the following precautions when
handling the BHT equipped with laser light.
1) Never stare into the laser light.
2) Never point the code reading windows at someone's eyes.
BHT-1700QLWB
code reading
window
5
BHT-1700QWB
Advertisement
