Toshiba ESTIA R32 HWT-401HW-E Manual page 54

Submenu settings
Top screen
Press [ Menu ] + [
at the same time (4 s)
DN for hydro unit (DN for remote control)
• The DN code setting for the hydro unit is only available for the main remote control.
• Set the DN codes for the various operating modes via the remote control.
(1) Press the [ ] / [
on the "Submenu settings" screen, then press the [
Submenu settings (2/2)
Service monitor
DN for hydro unit
DN for remote control
Reset current consumption data
Sensor information
(2) Press the [ ] / [
[ ] / [ ] button to enter the value.
DN for hydro unit
Code
(DN)
0010
Fixed
←
(3) Press the [ ] button. The setting is registered.
14 I 14 I TOSHIBA
TOSHIBA
]
] button to select "DN for hydro unit" (or "DN for remote control")
Confirm
] button to select "DN" or "Data", then press the
Data
0070
→
] button.
Submenu settings (2/2)
Service monitor
DN for hydro unit
DN for remote control
Reset current consumption data
Sensor information
DN for remote control
Code
(DN)
01
Fixed
←
Confirm
Data
0000
→