Wireless Access Point; Fe And Ge Port Pinouts - Cisco 860 Series Hardware Installation Manual

Appendix A Technical Specifications

Wireless Access Point

Table A-2
Table A-2
Description
Radio technology
Operating frequency
Channels
PHY Data rate
1. MIMO = Multiple Input/Multiple Output.

FE and GE Port Pinouts

Table A-3
(PoE). Some models support PoE using an optional module, and some models do not support PoE. For
ports that do not support PoE, pins 4, 5, 7, and 8 are not connected.
•
•
•
Table A-3
Pin
1
2
3
4
5
6
7
8
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-07
lists the specifications for the wireless access point (AP).
Wireless Access Point Specifications
describes the RJ-45 connector pinouts for Fast Ethernet (FE) ports with Power over Ethernet
Cisco 860VAE and 860VAE-K9 ISRs do not support PoE.
Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant
devices connected to FE ports 0 and 1.
Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant
devices connected to FE ports 0, 1, 2, and 3.
Ethernet FE LAN Port Pinouts
Function
1
RX+
RX–
2
TX+
PoE—optional
PoE—optional
TX–
PoE—optional
PoE—optional
Design Specification
IEEE 802.11n draft 2.0 standard compliant. 2x3
1
MIMO radio. Backward compatible with
802.11b/g and 802.11a (Cisco 890 series routers).
Cisco 860 series and 880 series ISRs
2.4-GHz radio band
Cisco 890 series ISRs
2.4 and 5-GH radio bands
Country-specific 20 and 40 MHz
802.11b up to 11 Mb/s
802.11g up to 54 Mb/s
802.11n up to 300 Mb/s
Wireless Access Point
A-3