Kensington Lock; Reset Button - Cisco 860 Series Hardware Installation Manual

Hardware Features
•
•
•

Kensington Lock

A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.

Reset Button

The Reset button is used to restore the router to the factory default configuration. To do this, press the
reset button within five seconds of powering up the router.
If you execute a CLI reboot command while the embedded wireless AP is running Cisco Unified IOS
Note
software, the router reboots, but the AP continues running. Clients with Cisco Unified IOS software are
controlled by a wireless LAN controller (WLC) and can be reset only by the controller.
Cisco 860VAE Routers—Custom Configuration File
On Cisco 860VAE routers, the reset button can be used to load a custom configuration file without
having to use the CLI. The configuration file can be located on an external USB flash drive or on the
router's compact flash.
The custom configuration file must be named one of the following:
•
•
When the system attempts to load a custom configuration file, configuration files on a USB flash drive
have priority over configuration files on the router's flash drive and the "SN-customer-config" file name
has priority over the "customer-config" file name. The priority for loading a configuration file is as
follows:
1.
2.
3.
4.
If the router does not find a valid custom configuration file, the system aborts the process.
To reset the router to the factory default configuration, follow these steps:
Verify that IOS is running correctly by checking that the system status LED is on.
Step 1
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-18
Wireless LAN Connectivity
Small Form-Factor Pluggable Port
Feature Summary
customer-config
SN-customer-config
where "SN" is the unique hardware serial number.
USB flash0: SN-customer-config
USB flash0: customer-config
Router flash: SN-customer-config
Router flash: customer-config
Chapter 1 Product Overview
OL-16193-07