Cisco 890 Series Isrs - Cisco 860 Series Hardware Installation Manual

Chapter 1 Product Overview
3
4
5

Cisco 890 Series ISRs

The Cisco 890 series ISRs have the following features:
•
•
•
•
•
Note
•
•
•
•
•
The following feature is located on the front panel:
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-07
Voice ports—four FXS/DID ports and one
FXO port.
Fast Ethernet LAN—four ports
Console Port
Integrated 8-port 10/100 Ethernet switch for connecting to the LAN
10/100 FE and 10/100/1000 Gigabit Ethernet (GE) port for connecting to the WAN
Separate console and auxiliary ports
Optional embedded Wi-Fi CERTIFIED™ dual radio 802.11a/b/g/n-compliant wireless AP
Optional 4-port PoE
The Cisco 890 series ISRs can include an optional PoE module that provides power to
802.3af-compliant devices connected to ethernet ports 0 through 3. If this feature was not
configured with the factory order you must order and install it to enable the PoE function.
Security feature card (SFC) socket
DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB
system memory in Cisco 891 and 892 series ISRs, and a total of 1 GB system memory in
Cisco 892F series ISRs
Three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel for
non-captive dual-band WLAN antenna (wireless models only)
Supports the AIM2-CUE-K9 and AIM2-APPRE-104-K9
Gigabit Ethernet (GE) small-form-factor pluggable (SFP) port (Cisco 892F series ISRs only)
Two USB 1.1 ports
8 Power connector
9 Earth ground connection
10 Kensington security slot
Cisco 890 Series ISRs
1-15