3. REPLACEMENT PROCEDURE IN CASE OF AN IQ
PROJECTOR
Overview
•
Reset lamp runtime
•
Access to the lamp unit(s) in the iQ projector
•
Removing the lamp unit(s)
•
Mounting the Lamp Unit
•
Mounting the cover.
•
Cleaning
3.1 Reset lamp runtime
3.1.1
Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 3-1)
7. Press ENTER
A dialogbox is displayed (image 3-2)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 3-1
Image 3-2
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004
3. Replacement procedure in case of an iQ Projector
5