Table of Contents
Advertisement
3. Replacement procedure in case of an iQ Projector
Image 3-8
unlocking lamp 1 & lamp 2
Image 3-10
Lamp 1 removed
3.4 Mounting the Lamp Unit
3.4.1
Mounting the lamp unit(s)
What has to be done ?
1.
The lamp has to be mounted
2.
The lamp has to be connected.
Perform the procedure for both lamps if both lamps have to be replaced.
In this procedure lamp1 is replaced, the procedure being the same for lamp2.
8
Image 3-9
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004
Advertisement
Table of Contents
