Table of Contents
Advertisement
3. Replacement procedure in case of an iQ Projector
W
ARNING
technician.
3.2 Access to the lamp unit(s) in the iQ projector
3.2.1
Removing the back cover
Necessary tools
a flat screwdriver of 10 mm
Necessary parts
No parts.
W
ARNING
power cord from the wall outlet. Once the projector is cooled down and the power is off, continue with the
replacement procedure.
Removing the back cover
1. Turn with a screwdriver the cover lock screw A quarter turn counter clockwise. (image 3-3)
2. Remove the back cover.
See image 3-4, image 3-5.
Image 3-3
rear cover lock screw
Image 3-5
right view of the projector, rear cover removed
6
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
:
Risk of Electrical Shock: For replacement procedures power down the projector and unplug the
Image 3-4
rear cover removed
R5976375 LAMP KIT FOR IQ/SIM4 PROJECTORS 23/06/2004
Advertisement
Table of Contents
