BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Spring washer Long bolt (M6x35mm) (∅6.5x11mm) Flat washer Allen key (4X80mm) (∅6.5x16mm) STEP 1...
Page 4
STEP 2 Attach bottom self (B) to side frames (C) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4). ITEM NO.: BJ6S Printed in Vietnam REVISED NOV 22, 2014 - 4 -...
Page 5
ITEM NO.: BJ6S Printed in Vietnam REVISED NOV 22, 2014 - 5 -...