When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Mounting Pedestal Plate Wood slide ITEM NO: T-36SDP Printed in Vietnam REVISED SEP 09, 2014 - 2 -...
(M4 x 80mm) STEP 1 Attach Legs (B) to pedestal (C) with Nuts (3), and Washers (2) and (1). Tighten with the Wrench (4) as shown below. ITEM NO: T-36SDP Printed in Vietnam REVISED SEP 09, 2014 - 3 -...
Page 4
Carefully place the pedestal on the bottom side of the table top. Attach the top (A) to mounting plate with bolts (8), and washers (6) and (7). Tighten with the Allen key (9) ITEM NO: T-36SDP Printed in Vietnam REVISED SEP 09, 2014...
Page 5
Then, gently lower the leaf and place in the down position ITEM NO: T-36SDP Printed in Vietnam REVISED SEP 09, 2014...