Protect the surface of the product with a cloth if you are using any product with rubber feet or base. ASSEMBLY TOOLS REQUIRED NOT INCLUDED ITEM NO.: TV-31 Printed in Vietnam REVISED FEB 03, 2016 - 2 -...
*Wooden knob: (M4x25mm) Wooden knob Warning label Allen key Steel band (M4x80mm) METAL KNOB Small flat (30 x 30mm) washer GOES WITH (ɸ6.5x13mm) FINISHED ITEM ONLY. ITEM NO.: TV-31 Printed in Vietnam REVISED FEB 03, 2016 - 4 -...
Page 5
Attach Bottom panel (C), Vertical frame (G) to the unit (from Step 1) with bolts (1) and washers (4) and (13) as shown below. Tighten with Allen key (11) . ITEM NO.: TV-31 Printed in Vietnam REVISED FEB 03, 2016...
Page 6
Tighten with Allen key (11). Attach Side frame (E) to Bottom frame (H) with bolts (2) and washers (13), and (4), as shown below. Tighten with Allen key (11). ITEM NO.: TV-31 Printed in Vietnam REVISED FEB 03, 2016...
Page 7
Slide drawer bottom (L) into grooves of drawer sides (K) and drawer fronts (I) as shown below. Attach drawer back (J) to the drawer sides (K) with screws (5) as shown below. Tighten with a screwdriver. ITEM NO.: TV-31 Printed in Vietnam...
Page 8
Attach steel band (12) to the unit with screws (6). Then attach the steel band to a wall with screw (5) as shown below (to secure the product and prevent tipping). Tighten with a screwdriver. ITEM NO.: TV-31 Printed in Vietnam...