Advertisement
4
Repeat for every bed slat until finished.
Step 7
You will need
Allen Key
2 x Screws
(H2)
(H5)
Phillips head
1 x Felt Pad
Screwdriver
(H6)
Make sure the inner space is square.
Attach the felt pad (H6) to the centre of centre rail (P7).
Then attach the timber cross rail (P5) to the centre of side rails (P6) by using 2 x screws (H5).
Now tighten all the bolts on the centre rail (P7) and tighten bolts on the headboard (P1)
and footboard (P2).
fantasticfurniture.com.au
(P1)
(P6)
(P5)
(H6)
(P7)
Make sure screws
are fully tightened.
(H5)
(H2)
(P5)
(P2)
Page 9
Advertisement
