Alamo BUSH HOG RMB 1660 Operator's Manual page 178

MAINTENANCE
ROTARY HEAD LUBRICATION
Lubricate all the points indicated in the diagram below at the intervals stated. Grease point should be lubricated
on a daily basis prior to work and level of oil in the bearing housing checked. Fill oil up to plug level (as
required) using EP90 gearbox oil. Oil capacity is 19.9 fl. oz. Check oil leaks around the spindle assembly on a
daily basis.
After work and always prior to storage the machine should be cleaned removing dirt and debris from deck.
Grease as indicated prior to storage. Always try whenever possible to store unit in a clean dry location
protecting it from the elements.
RMB 1660 01/22 Maintenance Section 5-4
© 2022 Alamo Group Inc.