Alamo BUSH HOG RMB 1660 Operator's Manual page 122

ASSEMBLY
DECK STOP
A Stop assembly is provided for placement on
the connecting boom of the operating machine;
it is multi-adjustable for use on 100mm square
section or 100/110mm tapered section booms.
Its function is primarily to stop the deck coming
into contact with the machines arm components
when the head is fully angled, but also acts as a
support for the unit during transportation.
The stop should be assembled to the required
configuration to fit the specific boom and
positioned on the boom at a height where the
rubber buffers contact an outer point on the top
of the deck when the unit is fully angled in either
direction.
RMB 1660 01/22 Assembly Section 3-22
© 2022 Alamo Group Inc.