16.1 Transport Position
•
Select ROTOR OFF and wait until rotor has
stopped turning
•
Ensure that the "LIFT" and "ANGLE FLOAT"
are switched "OFF"
•
Select "SLEW" mode on the control assembly.
•
Operate "SLEW IN"
•
Operate "LIFT" and "REACH" to position the
machine.
•
Operate "REACH IN" until dipper arm contacts the transport cradle
•
Select "LIFT UP" and raise the arms until the tension link is 300mm (12") from the tractor cab.
•
Operate "ANGLE" and position the flail head in as compact position as possible. (See Transport Position)
•
Fully screw in the lift and slew cylinder shut-off valve.
•
Fully close the lift and slew cylinder hydraulic shut-offs.
RMB 1660 01/22
© 2022 Alamo Group Inc.
OPERATION
Operation Section 4-39