Alamo BUSH HOG RMB 1660 Operator's Manual page 110

ASSEMBLY
Fit the stabilizer into position with its arms aligned with the
holes of the mainframe and attach the stabilizer nose to the
tractors top link. Select the highest possible position
available avoiding any load sensing properties.
NOTE: The bolt on nose of the stabilizer is reversible in
order to accommodate variations of tractor linkage designs.
Secure the stabilizer in position using the hardware
provided. Attach the stabilizer arm to the machine selecting
the lowest hole possible.
Fit top link between the stabilizer and the mainframes upper
linkage point.
RMB 1660 01/22 Assembly Section 3-10
© 2022 Alamo Group Inc.