Alamo BUSH HOG RMB 1660 Operator's Manual page 162

OPERATION
17. TRANSPORT POSITION-Head Attached
The machine is transported in line to the rear of the tractor with a minimum of 11-1/4" clearance between the
tension link and the rear cross member of the tractor cab.
18. TRANSPORT POSITION-Head Removal
With the flail head removed the arms are fully folded but the lift ram remains retracted. If the lift ram is extended
the weight of the arms will cause the balance of the machine to go over center causing the tension link to crash
into the rear cross member of the tractors cab.
During transport the 'SLEW' mode must ALWAYS be selected on the control assembly.
RMB 1660 01/22 Operation Section 4-40
© 2022 Alamo Group Inc.