Table of Contents
Advertisement
DEALER SETUP INSTRUCTIONS
1. The machine will be delivered in a partially
dismantled condition, secured with transport
strap and banding.
2. Choose a firm level site.
3. Remove the transport strap, banding straps and
loose items.
4. The machine is delivered from the factory filled
with oil. Check the oil to confirm.
5. Raise the machine using overhead lifting
equipment with a minimum capacity of 3307
lbs. LEAVE IN POSITION AT THIS STAGE.
6. Lower the legs and pin in position selecting the
holes that position the machines gearbox stub
shaft approx. 3" below the tractors P.T.O. shaft.
Note: Leg pin position used.
7. Unbolt stabilizer from machine and remove the
stabilizer nose quadrant pin.
RMB 1660 01/22
© 2022 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-7
Advertisement
Chapters
Table of Contents
