Alamo BUSH HOG RMB 1660 Operator's Manual page 118

Flailhead Hose Attachment
With the flailhead attached to the machine the
hydraulic hoses can now be connected refer to
diagrams opposite. Upper port 'A' on the motor
connects to junction bracket point 'A' on the arm and
lower port 'B' on the motor connects to junction
bracket point 'B' on the arm.
Note: If a hose tray is already fitted to the arm it will
need to be removed to allow the hoses to be
connected to the junction bracket – ensure the hose
tray is replaced once the hoses have been
connected.
Do Not attempt to raise or lower the boom or mower head unless the Implement is securely
attached to the Tractor. The Implement could tip over and cause equipment damage and
possible serious injury or death. Do Not use the boom controls to assist in installing the
implement on the tractor. Raise or Lower the boom and mower head only while seated in
the Tractor operator's seat with the seat belt securely fastened. Inadvertent contact with
the boom controls could allow a component to fall. A sudden or inadvertent fall by any of
these components could cause serious injury or even death.
IMPORTANT: Scan this QR Code with your smart phone to link to the ADMA
Driveline Safety Manual for more information on the safe use of a driveline during
normal operation and maintenance. Or type in your internet browser the following
web address: www.algqr.com/dme
RMB 1660 01/22
© 2022 Alamo Group Inc.
ASSEMBLY
Ops-0009-MISC
Assembly Section 3-18
(SBM-23)